Integrated Solar Led Street Light Courtyard Lamp Rustproof Aluminum
12V
Product quick detail:
1. Light control and time control
Time control means that the glim samrt lamp will control the LED light to turn
up according to the
timing set. Light control is to switch the lamp on and off
according to the intensity of the light.
2. Bright controller
Smart light efficiency management, multi-core LED work at the same
time, improve
smart judgment of weather conditions, reasonable planning of
discharge power, MPPT
charging mode improves charging efficiency by 25%.
Product features:
1. Bright new energy's patent control system
2. The solar light can work at least 15 days in rainy or cloudy
days.
3. Operation environment from -40℃ to 80℃
4. It can work 13 hours a day.
5. Aluminum+Insulation engineering plastics
6. 4000-8000lm Lumen flux
Product application:
1. Playgrounds, courtyards.
2. Entrances, exits, muster areas.
3. Outside storage areas, perimeter lighting, etc.
4. Carparks, paths, laneways.
5. Private roads, gates, entraces.
6. Where wiring is not economical or practical.
Product advantages:
1. 0 energy consumption: zero electricity bill, zero wiring, zero
maintenance, zero
energy consumption, zero danger, zero pollution, zero carbon, zero
management.
2. Patent Pending Design: the shape and design has been carefully
studied to
optimize all the construction. The outlook should be nice to be
seen. This is why
we have the best solution with the best assurance on the market.
3. No Cable Needed: Solar powered outdoor lighting easy
installation. You don't
need the cables. Our all in one solar street lights are very
user-friendly and avoid
the problem to do the connections with cables.
4. This product adopts the light energy three-body technology to
make the product
truly integrated.
5. Glim samrt technology, this product can work normally without
the sun, glim smart
technology can make low-light, blue light, red light, purple light
and other low light to
generate micro-electricity, can not be affected by rainy weather.
6. Ensure that each street light can operate normally! For some
solar products which
are installed on the main road in order to meet the natural
conditions caused by
continuous rainy days are designed to connect a backup power supply
to meet the
lighing needs. Our light energy products can continuously resist
cloud and rain for
more than 15 days.
FAQ:
1. What are the information you should give us to best customize
our solar lights?
(1)The sunshine hours per day or the exact city where the street
lights will be installed in.
(2)How many continuous rainy days in the raining season there? It
matters because we
have to make sure the light can still work in 3 or 4 raining days
with little sunshine.
(3) The height of the poles, or the width of the road.
2. What is the typical maintenance schedule for a solar light
system?
There is no regular maintenance required for a solar lighting
system. However, it is helpful
to keep the solar panels clean, especially in a dusty climate.
3. What happens if there are cloudy days?
Electrical energy is stored in the battery each day, and some of
that energy is used to operate
the light at night. Generally, the system we design would allow the
battery operate the light
for seven nights without charging. This means even after a series
of cloudy days, there still
will be plenty of energy stored in the battery to power the light
at night. Also, the solar panel
will continue to charge the battery (although at a reduced rate)
even when it is cloudy.
4. Which types of warranties you will have?
(1) Solar Panel: Mininum 25 years of power generation capacity,
with 2-years warranty.
(2) LED Light: Mininum 30.000 hours life span, with 2-year all
inclusive warranty - covers
everything on the LED street lights, including lamp holder parts,
power supply, radiatior, scaling
gasket, LED modules, etc.
(3) Battery: 5 to 7 years life span, with a 2-year warranty
(4) Controller inverter and all the electronic parts: Minimum 8
years by ordinary usage, with a 2- year warranty
(5) Pole solar panel bracket and all the metal parts: up to 10
years life span.
5. How does the light know when to turn on and turn off?
Bright New Energy's solar controller uses a photocell or timer to
control when the light should turn on or turn off.
The photocell detects if the sun comes up or goes down. The solar
controller utilizes an internal timer that is
pre-set for a specific time to determine when to switch the light
off.
6. How many hours need to install solar LED street light?
The complete installation will not take longer than 2 hours if done
properly and stepwise.
Installation site: Courtyard, community, park, scenic area, etc.
