all in one integrated led solar street light 100 watt 120 watt
Prdduct application:
1. HOAs, neighborhood streets for security lighting.
2. Along roadways, freeways, highways, rural roads.
3. Where wiring is not economical or practical.
4. trails and general open spaces.
5. Entrances, exits, muster areas.
6. Outside storage areas, perimeter lighting, etc.
Product features:
Aluminum alloy case, Patent integrated design.
Professional light distribution for wide lighting.
Replaceable big battery, can support 3 nights.min lighting.
Easy to install on pole.
Product advantages:
1. 0 energy consumption: zero electricity bill, zero wiring, zero
maintenance, zero
energy consumption, zero danger, zero pollution, zero carbon, zero
management.
2. Low-light driving power, even in continuous rainy weather, as
long as there is
ultraviolet light transmitted by the light, the high-efficiency
power battery of glim
smart street lamps can be recharged, which achieves a day-to-day
working mode.
3. No Cable Needed: Solar powered outdoor lighting easy
installation. You don't
need the cables. Our all in one solar street lights are very
user-friendly and avoid
the problem to do the connections with cables.
4. Solar powered street lights can be installed in any location with
the direct view
of the sun, eliminating the need for electric power and meter electric bills
associated with it.
6. Our high-quality lights are engineered to a commercial grade, built
to last the test
of time and practically maintenance free. Installation is typically
quick, easy and often
at a lower cost compared to expensive electric cable trenching.
Product quick detail:
FAQ:
1. What are the information you should give us to best customize
our solar lights?
(1) The sunshine hours per day or the exact city where the street
lights will be installed in.
(2) How many continuous rainy days in the raining season there? It
matters because we
have to make sure the light can still work in 3 or 4 raining days
with little sunshine.
(3) The height of the poles, or the width of the road.
2. What is the typical maintenance schedule for a solar light
system?
There is no regular maintenance required for a solar lighting
system. However, it is helpful
to keep the solar panels clean, especially in a dusty climate.
3. What happens if there are cloudy days?
Electrical energy is stored in the battery each day, and some of
that energy is used to operate
the light at night. Generally, the system we design would allow the
battery operate the light
for seven nights without charging. This means even after a series
of cloudy days, there still
will be plenty of energy stored in the battery to power the light
at night. Also, the solar panel
will continue to charge the battery (although at a reduced rate)
even when it is cloudy.
4. Which types of warranties you will have?
(1) Solar Panel: Mininum 25 years of power generation capacity,
with 2-years warranty.
(2) LED Light: Mininum 30.000 hours life span, with 2-year all
inclusive warranty - covers
everything on the LED street lights, including lamp holder parts,
power supply, radiatior, scaling
gasket, LED modules, etc.
(3) Battery: 5 to 7 years life span, with a 2-year warranty
(4) Controller inverter and all the electronic parts: Minimum 8
years by ordinary usage, with a 2- year warranty
(5) Pole solar panel bracket and all the metal parts: up to 10
years life span.
5. How does the light know when to turn on and turn off?
Bright New Energy's solar controller uses a photocell or timer to
control when the light should turn on or turn off.
The photocell detects if the sun comes up or goes down. The solar
controller utilizes an internal timer that is
pre-set for a specific time to determine when to switch the light
off.
6. How many hours need to install solar LED street light?
The complete installation will not take longer than 2 hours if done
properly and stepwise.
